Two-stage / with cord, plug, and switch |
 | | |
| ? | Low ultimate pressure. | | ? | High performance type. | | ? | Features gasballastmechanismandbakflowprevention mechanism. | | ? | World wide voltages | | ? | CE marked |
|
|
 Specifications |
| | Unit | 50Hz | 60Hz | | Actual Pumping Speed | L/min. | 40 | 48 | | Ultimate pressure | Pa | 6.7 x 10-2 (6.7 x 10-1) (G.V.closed)
6.7 (G.V.open) | | Motor | | Single phase, 200W, 4 poles, Multiple-rangemotor
Capacitor start & run, AC 100-120, 200-240V | | Full load current | A | 4.20 (100V), 4.40 (110V),
4.60 (115V), 5.05 (120V)
2.10 (200V), 2.20 (220V),
2.30 (230V), 2.60(240V) | 3.60 (100V), 3.40 (110V),
3.40 (115V), 3.60 (120V)
1.80 (200V), 1.70 (220V),
1.70 (230V), 1.80(240V) | | Oil capacity | mL | 550 – 800 | | Recommended oil | | R-2 | | Weight | kg | ac. 16 | | Inlet port diameter | mm | KF-25 | | Ambient operation temp.range | °C | 7 – 40 | | Dimensions | W x L x H
(mm) | 150 x 427 x 228.5 |
|
|
| *Ultimate pressure is measured withMacleodgauge.In( ) shows the measurements withPiranigauge. |
| Caution |
| GLDSeries,compared with G Series, is markedly upgraded. Forthesakeofhaving the maximum performance, in addition to notesforGseries,be careful of also the followings. | | 1. | GLDseriesiscapable of reaching to a high vacuumarea(10-2 Pa). Flanges,vesselsusable at a high vacuumare required. | | 2. | Anoil-sealed rotary pump is not recommendedforcontinuousoperationnear atmospheric pressure. |
| Outlinedrawing |
| PumpingSpeedCurves |
| Option |
Optionalsuctionport
| Size | Note | | KF-25 suctionport | KF-25X(40X40) | Attachedtostandardtype | | Suctionpipeforhose | Dia.8 | Option. 40X40adapterisneeded,usethe suction pipe /40X40 adapter | | Suctionpipeforhose | Dia.12 | Option. 40X40adapterisneeded,usethe suction pipe /40X40 adapter | | Suctionpipeforhose | Dia.15 | Option. 40X40adapterisneeded,usethe suction pipe /40X40 adapter | | Suctionpipeforhose | Dia.18 | Option. 40X40adapterisneeded,usethe suction pipe /40X40 adapter | | Suctionpipeforhose | Dia.22 | Option. 40X40adapterisneeded,usethe suction pipe /40X40 adapter | | Suctionpipeforhose | Dia.27 | Option | | A typesuctionpipe | PT1/4-L20,male | Option. 40X40adapterisneeded,usethe suction pipe /40X40 adapter | | B typesuctionpipe | PT1/4-L20,female | Option. 40X40adapterisneeded,usethe suction pipe /40X40 adapter | | C typesuctionpipe | PT1/4-L10,male | Option. 40X40adapterisneeded,usethe suction pipe/40X40adapter |
|
Optional exhaust port
| Size | Note | | Exhaust port cap | - | Attachedtostandardtype | | Exhaustpipeforhose | Dia.12 | Option | | Exhaustpipeforhose | Dia.15 | Option | | Exhaustpipeforhose | Dia.18 | Option | | KF-16 exhaustport | KF-16 | Option | | KF-25 exhaustport | KF-25 | Option |
|
Trap for exhaust side
| Model | Note | | Oil-mist trap | OMT-050A | Option | | Oil-mist trap | OMT-100A | G3/4-G1 adapterisneeded,useOMT-100A / adapter | | In-linetypeoil-misttrap | OMI-100 | G3/4-G1 adapterisneeded,useOMI-100 / adapter |
|
Trap for suction side
| Model | Note | | For-line trap | OFI-050C | Prevent counter flowofoildiffusioninto vacuum chamber, Need KF-25clampforattaching | | For-line trap | OFI-050V | Prevent mixing powderorliquidintothe pump, NeedKF-25clumpforattaching |
|
|